Production of the new Ford Model A, successor to the Model T, began at the Rouge assembly plant in Dearborn, Michigan, US


Thursday 27th October 1927

Production of the new Ford Model A, successor to the Model T, began at the Rouge assembly plant in Dearborn, Michigan, US. Prices for the Model A ranged from US$385 for a roadster to US$1400 for the top-of-the-line Town Car. The engine was a water-cooled L-head inline 4-cylinder with a displacement of 201 cu in (3.3 l). This engine provided 40 hp (30 kW; 41 PS). Top speed was around 65 mph (105 km/h). The Model A had a 103.5 in (2,630 mm) wheelbase with a final drive ratio of 3.77:1. The transmission was a conventional 3-speed sliding gear manual unsynchronised unit with a single speed reverse. The Model A had 4-wheel mechanical drum brakes. The 1930 and 1931 models were available with stainless steel radiator cowling and headlamp housings. The Model A came in a wide variety of styles including a Coupe (Standard and Deluxe), the Business Coupe, Sport Coupe, Roadster Coupe (Standard and Deluxe), Convertible Cabriolet, Convertible Sedan, Phaeton (Standard and Deluxe), Tudor Sedan (Standard and Deluxe), Town Car, Fordor (2-window) (Standard and Deluxe), Fordor (3-window) (Standard and Deluxe), Victoria, Station Wagon, Taxicab, Truck, and Commercial.[citation needed] The very rare Special Coupe started production around March 1928 and ended mid-1929. The Model A was the first Ford to use the standard set of driver controls with conventional clutch and brake pedals, throttle, and gearshift. Previous Fords used controls that had become uncommon to drivers of other makes. The Model A’s fuel tank was situated in the cowl, between the engine compartment’s fire wall and the dash panel. It had a visual fuel gauge, and the fuel flowed to the carburetor by gravity. A rear-view mirror was optional. In cooler climates, owners could purchase an aftermarket cast iron unit to place over the exhaust manifold to provide heat to the cab. A small door provided adjustment of the amount of hot air entering the cab. The Model A was the first car to have safety glass in the windshield. The Soviet company GAZ, which started as a joint venture between Ford and the Soviet Union, made a licensed version 1932–1936. This served as the basis for the FAI and BA-20 armored cars which saw use as Soviet scout vehicles in the early stages of World War II. In addition to the United States, Ford made the Model A in plants in Argentina, Canada, France, Germany and the United Kingdom and Denmark. In Europe, where in some countries cars were taxed according to engine size, Ford in the UK manufactured the Model A with a smaller displacement engine of 2043 cc providing a claimed output of 28 hp (21 kW; 28 PS). However, the engine equated to a British fiscal horsepower of 14.9 hp (11.1 kW; 15.1 PS) (compared to the 24 hp (18 kW; 24 PS) of the larger engine) and attracted a punitive annual car tax levy of £1 per fiscal hp in the UK . It therefore was expensive to own and too heavy and thirsty to achieve volume sales, and so unable to compete in the newly developing mass market, while also too crude to compete as a luxury product. European manufactured Model As failed to achieve the sales success in Europe that would greet their smaller successor in England and Germany. Model A production ended in March, 1932, after 4,858,644 had been made in all body styles. Its successor was the Model B, which featured an updated 4-cylinder engine, as well as the Model 18, which introduced Ford’s new flathead (sidevalve) V8 engine.


Leave a Reply

365 Days Of Motoring

Recent Posts

Categories

Disclaimer

I We have no wish to abuse copyright regulations and we apologise unreservedly if this occurs. If you own any of the material published please get in touch.