Thursday 27th November 1913

Peter Paul Schilovsky, designer of the gyrocar, successfully tested the prototype at the Wolseley factory in Birmingham, England. The gyrocar was powered by a modified Wolseley C5 engine of 16 – 20 hp, with a bore of 90 mm and a stroke of 121 mm. It was mounted ahead of the radiator, driving the rear wheel through a conventional clutch and gear box. A transmission brake was fitted after the gearbox- there were no brakes on the wheels themselves. The weight of the vehicle was 2.75 tons and it had a very large turning radius.

In 1927 Louis Brennan, funded to the tune of £12,000 (plus a £2000 per year) by John Cortauld built a rather more successful gyrocar. Two contra-rotating gyros were housed under the front seats, spun in a horizontal plane at 3500 rpm by 24V electric motors powered from standard car batteries. This was the greatest speed obtainable with the electric motors available, and meant that each rotor had to weigh 200 lb (91 kg) to generate sufficient forces. Precession was in the vertical fore-aft plane. The car had a Morris Oxford engine, engine mountings, and gearbox. Two sidewheels (light aircraft tailwheels were used) were manually lowered on stopping; if the driver forgot and switched off the gyros and walked away, the car would continue to balance itself using the gyro momentum for a few minutes, and then the wheels would automatically be dropped to stop tipping.